Dowsing Tools – Y-Rods

    Published: 06-16-2009
    Views: 22,612
    Dowsing Expert Marty Cain discusses the dowsing tools, Y-rods.

    Marty Cain: Hi! I am Marty Cain from the American Society of Dowsers and we'll be demonstrating today how to use some basic dowsing tools and how to make them. And this section of our demonstration will be how to make the Y-rod, which is an ancient tool used throughout time. My grandfather always suggested that I use a apple. So, here's an apple twig and the problem with using apple or any other willow or an other tree branch is that you have to cut the branches. So I don't usually use a branch unless I'm out of in woods and I don't have any other tool with me. But apple was good and this is a Crabapple from my yard and what I've done is I've looked to find a branch that has pretty much equal with Y in it and then a short base for the pointer. So what I will do is cut that and then I'll clip off and trim it down, so you'll start to see that we have just that. And then I want the length of the Y itself about equal. So I'll cut off those and trim them down so that we have something to hold on to. That's it. Of course, if I was just fooling around, I wouldn't have to trim it at all. You can use it with all the little twigs on it, but they kind of get in the way especially for demonstrating. So here we have, my apple branch, it's in the shape of a Y-rod. Now I want to make sure the section where my hand is going to be, is a little smoother. Just to make sure that I don't hurt myself on these barbs. Because this is where I'll be holding on to it. So I want it as smooth as I can make it. So there -- so this is how we hold a Y-rod. So any branch that's flexible, now you can't use a Pine branch because when you put pressure on it, which is what you need to do to get the tension, it will break. So you need to have some branch that is able to hold the tension that you push on it and willow and apple are two very good ones, Walnut's probably good, just we are going to try almost anything, but if it's too brittle, it will just crack instead of giving the tension you need. So this is the shape of the Y-rod, obviously, it's a Y. You hold it by placing your hands underneath the Y, your thumbs over the top and then squeeze it and then you push in ever so slightly, so you've got a tension and it's often good to hold it a little bit away from your face because if it pops up, you're going to get it in the nose and if it pops down, you're safe. So you hold it and it's a slightly above, so it's like this way slightly pointing up and then I ask like with all my tools, please show me my yes response. And my yes response is down. Please show me my no response and then my no response is up. So that's what you have, a yes and a no, no and yes from the Y-Rod. Now I've noticed in the years of teaching that a lot of people have trouble with the Y-rod. I am not sure why, I think, that the Y-rod is dowsed through the gut area, that the information goes into your shocker system in the dowsing and I think, this is basically used more from the lower section of your body and some people actually work more from the heart, which is I believe what the L-rods work from and the Third Eye is I think, where the pendulum works from. So, if you have trouble getting a response with a Y-rod and it doesn't feel to be your tool, then it doesn't matter, because you still have the L-rods and the pendulum and the Bobber to work, with but give it a go. There are some people who absolutely love the Y-rod. Now, this is the one that's made out of just a wire from a street sweeper. So again, it has tension and it moves up and down and with something like this, or this is another piece of plastic, this is just held together with a metal clip, and my yes response please, it goes down, my no response, it goes up. So whatever works for you, and often in the field, it may always point down for that's what you're looking for, so we'll check out the field responses, in one of the later demonstrations. So this keeps me from having to cut down trees and destroy my apple orchid. So, there you have it, the Y-rod. I use a Y-rod in the field a lot, it's a very good tool for looking for water or for looking for lost items in a field or on the beach or whatever, and we'll go over that. So, there you have how to make your Y-rod. In the next segment, we'll be taking about the Bobber. And we'll be going right to that section next.